Skip to content
One PhysicsQuadrant Docs

Edit TG-51 Data Set Details

Use Data Set Details to identify the calibration record and set the date on which the measurements were performed.

Update the Record

Section titled “Update the Record”
  1. Open Calibration > TG-51 > Data Set Details.
  2. Confirm the selected institution, linear accelerator, and data set.
  3. Enter a clear Data set name.
  4. Select the Test date.
  5. Review the change count.
  6. Click Save.

Use a name that distinguishes the machine and calibration event, especially when the same linear accelerator has several records.

Restore a Value

Section titled “Restore a Value”

When the current value differs from the saved value, Quadrant shows the previous value and Restore name or Restore date.

Click the field’s restore action to return it to its saved value. Quadrant immediately removes that field from the pending changes. If it was the only pending edit, the change count and Save and Discard controls disappear; otherwise, the other pending edits remain.

Confirm the Result

Section titled “Confirm the Result”

After saving, the change count disappears and the selected data set uses the updated name or test date throughout the TG-51 pages.

Continue with Select TG-51 Equipment.